|Data Acquisition USB|
|FPGA + DSP processing|
|Server, Workstations & Panel PC|
|Systems & Backplanes|
|Tablet & PDA|
The XCalibur5090 is a high-performance, reconfigurable, conduction-cooled 6U LRM module based on the Xilinx Virtex-7 family of FPGAs. With a pair of Virtex-7 FPGA, high-speed serial interfaces, DAC and ADC channels, external memory, and flexible, high-density I/O, the XCalibur5090 is ideal for customizable, high-bandwidth, signal-processing applications.
The XCalibur5090 utilizes four AD9739 and two ADC12D1600RF to provide four channels of high-frequency 14-bit Digital Analog Conversion (DAC) at 2500 Mbps and four channels of 12-bit Analog Digital Conversion (ADC) at 1600 Mbps for high-performance Digital Signal Processing (DSP), which can also be used as two channels at 3200 Mbps.
The XCalibur5090 provides a high-performance, feature-rich solution capable of interfacing to and processing streaming data from a wide variety of sensors. The X-ES FPGA Development Kit (FDK) is provided to support the requirements of high-performance, real-time, embedded streaming data applications and simplify FPGA development. It includes IP blocks, example FPGA designs, and software to control and communicate with FPGAs.
Dual Xilinx Virtex-7 for high-performance logic and DSP applications
Up to 1 GB of DDR3 SDRAM per FPGA in two channels
128 MB of user NOR flash per FPGA
x8 GTX interconnect between FPGAs
234 single-ended interconnect between FPGA
Xilinx Virtex-7 XC7VX690T
Support for commercial and industrial temperature as well as -1, -2, -3 speed grades
X-ES FPGA Development Kit (FDK)
LRM Backplane I/O
28 3.3 V CMOS from FPGA
51 3.3 V CMOS to FPGA
17 3.3 V CMOS GPIO to FPGA
x1 RF REFCLK input
x4 RF ADC inputs
x4 RF DAC outputs
Debug access connector
x10 1.8 V GPIO to FPGA
6U LRM conduction-cooled form factor
Dimensions: 233 mm x 164 mm
0.8 in. pitch without solder-side cover
0.85 in. and 1.0 in. pitch with solder-side cover
Contact factory for appropriate board configuration based on environmental requirements.
Supported ruggedization levels (see the X-ES Ruggedization Chart): 1, 3, 5
Conformal coating available as an ordering option
Power will vary based on configuration and usage. Please consult factory.